TIPS:

1. If your Thermospa is equipped with a bubbling system, when you are finished using your spa make sure the blower regulator valve is in the full pressure position. This will ensure that when the bubbling system turns on automatically to clean the lines out, there will be enough pressure to purge all the water from the system. This will help to ensure that no water remains in the air lines to stagnate and you can be confident of a fresh clean spa when you go to get in again.

2. When exiting the spa, be sure to close all of you therapy control valves. Leaving these open will not hurt your hot tub, but when your pumps are automatically turned on twice a day, if the therapy control valves are open it will put air into the water stream and could cost your more to run the spa while you are not using it.

3. In my opinion, purchasing a cover lifter is a must on a 4 person tub or larger. The reason is that the cover is quite large and bulky. This will cause many people to slide their covers off of the spa and onto the ground. This will greatly shorten the life of your cover. Covers are expensive and you want to make yours last as long as possible.